EasyManuals Logo
Home>Cisco>Network Router>cBR Series

Cisco cBR Series Hardware Installation Guide

Cisco cBR Series
270 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #259 background imageLoading...
Page #259 background image
• Insert the cards swiftly and firmly, but do not shove them in.
• If present, be sure to use the little plastic levers on the side of the card to lock the card in.
• If the OIR is successful, there is absolutely no need to schedule a reload of the router.
Refer to the hardware installation guide for inserting or removing any card.
Supervisor Card and Supervisor PIC supports OIR without any software operation, but here are some
recommendations if you need to perform OIR of the Supervisor Card and Supervisor PIC:
• Check the Active/Standby state of the Supervisor Card or Supervisor PIC, which will perform OIR, by
using the show redundancy command.
• Use the redundancy force-switchover command if the location of the Supervisor Card or Supervisor
PIC is on the active slot.
• Perform OIR.
When you perform an OIR, the power supply to the corresponding Supervisor Card or Supervisor PIC
is cut off.
If you are performing an OIR on a standby Supervisor Card or a Supervisor PIC, cBR-8 might show error
messages, which you can ignore. When you insert the Supervisor Card or a Supervisor PIC the next time, the
card will function properly.
Verifying Status after an OIR
Execute the show platform command to check the status.
Before Removing the Line Card
Router#show platform
Chassis type: CBR-8-CCAP-CHASS
Slot Type State Insert time (ago)
--------- ------------------- --------------------- -----------------
7 CBR-CCAP-LC-40G ok 06:03:17
SUP0 CBR-CCAP-SUP-160G inserted 06:25:13
R0 ok, active
F0 ok, active
4 ok, active
4/1 CBR-SUP-8X10G-PIC ok 06:23:08
P0 PWR-3KW-AC-V2 ok 06:23:28
P1 PWR-3KW-AC-V2 ok 06:23:28
P2 PWR-3KW-AC-V2 ok 06:23:28
P3 PWR-3KW-AC-V2 ok 06:23:28
P4 PWR-3KW-AC-V2 ok 06:23:28
P5 PWR-3KW-AC-V2 ok 06:23:28
P11 CBR-FAN-ASSEMBLY ok 06:23:28
P11 CBR-FAN-ASSEMBLY ok 06:23:28
P12 CBR-FAN-ASSEMBLY ok 06:23:28
P13 CBR-FAN-ASSEMBLY ok 06:23:28
P14 CBR-FAN-ASSEMBLY ok 06:23:28
After Removing the Line Card
Cisco Converged Broadband Routers Hardware Installation Guide
251
Online Insertion and Removal of Cards on the Cisco cBR
Verifying Status after an OIR

Table of Contents

Other manuals for Cisco cBR Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco cBR Series and is the answer not in the manual?

Cisco cBR Series Specifications

General IconGeneral
BrandCisco
ModelcBR Series
CategoryNetwork Router
LanguageEnglish

Related product manuals