Cisco cBR Series Hardware Installation Guide

What to do next
Replace the FPEM (if required).
Removing the Power Cassette Module from the Cisco cBR
Chassis
Before you begin
• Remove the Power Modules.
• Be aware of the weight and size of the equipment. Handle it with care.
Required Tools and Equipment
• 3/16" flat-blade torque screwdriver
• T10 Torx screwdriver
Step 1 Loosen the two screws on the front power entry bezel using a 3/16" flat-blade torque screwdriver. Remove the bezel from
the chassis.
Cisco Converged Broadband Routers Hardware Installation Guide
195
Maintaining the Power System in the Cisco cBR Chassis
Removing the Power Cassette Module from the Cisco cBR Chassis

Cisco cBR Series Specifications

General

Category	Network Router
Modular Design	Yes
Operating System	Cisco IOS XE
Model Examples	cBR-8, cBR-4
Product Series	cBR Series
Purpose	Converged Broadband Router
DOCSIS Support	DOCSIS 3.1
Redundancy	Yes
Management	Cisco Prime
Product Family	cBR Series
Downstream Frequency Range	Up to 1.2 GHz
Upstream Frequency Range	Up to 204 MHz
Modulation Schemes	QAM
Power Supply	Redundant AC or DC power supplies
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Humidity	5 to 95% noncondensing