CHAPTER 14
Maintaining the Cisco cBR Chassis
• Powering Down the Cisco cBR Chassis, on page 185
• Unmounting the Cisco cBR Chassis, on page 185
Powering Down the Cisco cBR Chassis
You may want to power down the chassis to perform certain tasks, including:
• Transporting the chassis to a new location
• Repairing or upgrading the chassis hardware
• Mounting the chassis
Before you begin
Step 1 Push the toggle switch on the FPEM (AC or DC) on the rear of the chassis to OFF position.
Step 2 Disconnect AC or DC power.
What to do next
• Unmount the Cisco cBR chassis.
• Power up the Cisco cBR chassis.
Unmounting the Cisco cBR Chassis
Before you begin
• Install the chassis installation handle (Optional).
Required Tools and Equipment
• #2 Phillips screwdriver
Cisco Converged Broadband Routers Hardware Installation Guide
185
To Next Page
Loading...
