• Use the product in accordance with its marked electrical ratings and product usage instructions.
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030.
Warning
Safety Instructions
Do not unpack the module until you are ready to install it. Keep the module in the shipping container to prevent
accidental damage until you determine an installation site. Use the appropriate unpacking documentation
included with the module.
Note
Read the installation instructions before connecting the system to the power source. Statement 1004
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement
1030
Warning
Ultimate disposal of this product should be handled according to all national laws and regulations. Statement
1040
Warning
Warning Definition
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with
standard practices for preventing accidents. Use the statement number provided at the end of each
warning to locate its translation in the translated safety warnings that accompanied this device. Statement
1071
SAVE THESE INSTRUCTIONS
Warning
Cisco Converged Broadband Routers Hardware Installation Guide
48
Prepare to Install
Safety Instructions
To Next Page
Loading...
Need help?
General
