Cisco MCS 7800 Series User Manual

A-13
Cisco TelePresence System Release 1.4 Administrator’s Guide
OL-12586-02
Appendix A Command Line Interface (CLI) Commands
set feedbackwaitbasetime
set feedbackwaitbasetime
set feedbackwaitbasetime value
Syntax Description
Command Modes Admin
Command History
Usage Guidelines Use this command to set RTP feedback base wait time in milliseconds. Real feedback wait time is equal
to the maximum latency value plus the feedback wait base time.
Examples
admin:set feedbackwaitbasetime 200
Related Commands
value Sets RTP feedback base wait time in milliseconds. Values are from 30 to
400. Default is 150.
Release Modifications
1.1 This command was first documented.
Command Description
show
feedbackwaitbasetime
Displays RTP feedback base wait time in milliseconds

Cisco MCS 7800 Series Specifications

General

Brand	Cisco
Model	MCS 7800 Series
Category	Switch
Language	English