Cisco MCS 7800 Series User Manual

CHAPTER
3-17
Cisco TelePresence Multipoint Switch Release 1.1 Administration Guide
OL-12586-02
3
Installing CTMS Administration Software
Initial Release: May 5, 2008, OL-12586-02
Last Revised: August 4, 2008
Contents
• Prerequisites, page 3-17
• Installing the CTMS Administration Software, page 3-18
Prerequisites
Before you install the Cisco TelePresence Multipoint Switch (CTMS) Administration software system
files, you need the following equipment and information:
• Cisco TelePresence System (CTS)-1000 Release and/or CTS-3000 assembled and configured to
support TelePresence conferencing. For more information, refer to the following guides:
– Cisco TelePresence System Release 1.3 Administrator's Guide
– Cisco TelePresence 3000 Assembly, Use & Care, and Field Replacement Unit Guide
– Cisco TelePresence 1000 Assembly, Use & Care, and Field Replacement Unit Guide
• Cisco MCS-7845-H2 or MCS-7845-I2 Media Convergence Server, installed and connected to a
Domain Name System (DNS) server and your network.
• Console able to access the Cisco MCS-7845-H2 Series Media Convergence Server.
• DVD that contains the CTMS Administration software application.
• Cisco Unified Communications Manager (Unified CM) 6.0 or higher configured to support CTS
Release 1.3 and integrated to work with CTMS, meaning that a SIP security profile, SIP trunk, and
route pattern specific to CTMS have been created. For more information about Unified CM for CTS
configuration, refer to Cisco Unified Communications Manager Installation Guide for the Cisco
TelePresence System.

Cisco MCS 7800 Series Specifications

General

Brand	Cisco
Model	MCS 7800 Series
Category	Switch
Language	English