Cisco MCS 7800 Series User Manual

A-8
Cisco TelePresence System Release 1.4 Administrator’s Guide
OL-12586-02
Appendix A Command Line Interface (CLI) Commands
set commandcount
set commandcount
set commandcount {enable | disable}
Syntax Description
Command Modes Admin
Command History
Usage Guidelines Use this command to either enable or disable the command count feature. This command changes the
CLI command prompt so that it displays a numeric value showing how many CLI commands have been
executed. This setting is valid for current session only.
Examples
admin:set commandcount enable
admin 0005:
Related Commands
enable Enables command count feature. Using enable changes the CLI command
prompt so that it displays a numeric value showing how many CLI
commands have been executed
disable Disables command count feature. Using disable changes the CLI command
prompt so that it stops displaying a numeric value showing how many CLI
commands have been executed.
Release Modifications
1.1 This command was first documented.
Command Description
set logging Enables or disables logging feature

Cisco MCS 7800 Series Specifications

General

Brand	Cisco
Model	MCS 7800 Series
Category	Switch
Language	English