Cisco MCS 7800 Series

CHAPTER
4-21
Cisco TelePresence Multipoint Switch Release 1.1 Administration Guide
OL-12586-02
4
Configuring CTMS Administration Software
Revised: June 6, 2008, OL-12586-02
Last Revised: August 4, 2008
Contents
• Overview, page 4-21
• System Settings, page 4-22
– Editing IP Settings, page 4-22
– Editing Access Settings, page 4-23
– Configuring and Editing QoS Settings, page 4-24
– Configuring and Editing Resource Management, page 4-28
• Cisco Unified Communications Manager Settings, page 4-32
– Configuring and Editing Unified CM Settings, page 4-33
– Configuring and Editing SIP Profile Settings, page 4-33
• Configuring and Editing Cisco TelePresence Manager Settings, page 4-35
• Configuring and Editing Access Management, page 4-36
• Upgrading Software Version, page 4-40
• Interface Failover, page 4-41
Overview
The following sections describe the System Configuration parameters for the Cisco TelePresence
Multipoint Switch (CTMS). System Configuration is divided into the following areas:
• System Settings, page 4-22
• Cisco Unified Communications Manager Settings, page 4-32
• Configuring and Editing Cisco TelePresence Manager Settings, page 4-35
• Configuring and Editing Access Management, page 4-36