Cisco MCS 7800 Series User Manual

A-7
Cisco TelePresence System Release 1.4 Administrator’s Guide
OL-12586-02
Appendix A Command Line Interface (CLI) Commands
set bad_ep_detect
set bad_ep_detect
set bad_ep_detect {enable | disable}
Syntax Description
Command Modes Admin
Command History
Usage Guidelines Use this command to either enable or disable the bad endpoint detection feature. If this command is set
to enable, bad source endpoints will be dropped from conferences; if set to disable, the bad endpoint
will be kept in the meeting.
Examples
admin:set bad_ep_detect disable
Telepresence Multipoint Switch; drop bad endpoint: disable
Related Commands
enable Enables bad endpoint detection feature; if detected, CTMS will drop a bad
endpoint from conferences
disable Disables bad endpoint detection feature.
Release Modifications
1.1 This command was first documented.
Command Description
show badep Displays whether bad endpoint detection has been enabled or disabled

Cisco MCS 7800 Series Specifications

General

Brand	Cisco
Model	MCS 7800 Series
Category	Switch
Language	English