Cisco MCS 7800 Series User Manual

A-23
Cisco TelePresence System Release 1.4 Administrator’s Guide
OL-12586-02
Appendix A Command Line Interface (CLI) Commands
show badep
show badep
show badep
Syntax Description None
Command Modes Admin
Command History
Usage Guidelines Use this command to display whether bad endpoint detection is enabled or disabled.
Examples
admin:show badep
Current setting to drop bad endpoint: enable
Related Commands
Release Modifications
1.1 This command was first documented.
Command Description
set bad_ep_detect Enables or disabled bad endpoint detection

Cisco MCS 7800 Series Specifications

General

Brand	Cisco
Model	MCS 7800 Series
Category	Switch
Language	English