A-19
Cisco TelePresence System Release 1.4 Administrator’s Guide
OL-12586-02
Appendix A Command Line Interface (CLI) Commands
set password admin
set password admin
set password admin
Syntax Description None
Command Modes Admin
Command History
Usage Guidelines Use this command to set a new administrator password.
Note Passwords must be at least 6 characters, but not more than 64 characters in length, and can
contain upper and lower case alphanumeric characters and the underscore and dash characters.
The following usernames are not allowed: apache, daemon, nobody, operator, and shutdown.
Examples
admin:set password admin
Please enter the old password: ******
Please enter the new password: ********
Re-enter new password to confirm: ********
Related Commands
Command Modifications
1.1 This command was first documented.
Command Description
None
To Next Page
Loading...
