Cisco MCS 7800 Series

A-56
Cisco TelePresence System Release 1.4 Administrator’s Guide
OL-12586-02
Appendix A Command Line Interface (CLI) Commands
show timezone
show timezone
show timezone {config | list}
Syntax Description
Command Modes Admin
Command History
Usage Guidelines Use this command to display the current timezone settings or to display a list of all available timezones
in long format.
Note The first value is the timezone index, which may be used to set a new timezone using the set timezone
command. You can also use the timezone name.
Examples
admin:show timezone list
0 - (GMT-12:00) Eniwetok, Kwajalein
1 - (GMT-11:00) Midway Island, Samoa
2 - (GMT-10:00) Hawaii
Current timezone: (GMT+10:00) Canberra, Melbourne, Sydney
Current timezone: (GMT+10:00) Canberra, Melbourne, Sydney
The numbers in first column 0, 1, 2 represent index that can be used in set timezone
command
0 - (GMT-12:00) Eniwetok, Kwajalein
1 - (GMT-11:00) Midway Island, Samoa
2 - (GMT-10:00) Hawaii
3 - (GMT-09:00) Alaska
4 - (GMT-08:00) Pacific Time (US & Canada)
5 - (GMT-07:00) Arizona
6 - (GMT-07:00) Mountain Time (US & Canada)
7 - (GMT-06:00) Central Time (US & Canada)
8 - (GMT-06:00) Central America
9 - (GMT-06:00) Saskatchewan
10 - (GMT-06:00) Mexico City
11 - (GMT-05:00) Bogota, Lima, Quito
12 - (GMT-05:00) Indiana (East)
13 - (GMT-05:00) Eastern Time (US & Canada)
14 - (GMT-04:00) Atlantic Time (Canada)
15 - (GMT-04:00) Caracas, La Paz
16 - (GMT-04:00) Santiago
config Displays the current timezone setting.
list Lists all available timezones.
Release Modifications
1.1 This command was first documented.