A-58
Cisco TelePresence System Release 1.4 Administrator’s Guide
OL-12586-02
Appendix A Command Line Interface (CLI) Commands
show version
show version
show version {active | inactive}
Syntax Description
Command Modes Admin
Command History
Usage Guidelines Use this command to display information about the version number of the software on the inactive or
active partition.
Examples
admin:show version active
Active Master Version: 1.1.1.0-30
Active Version Installed Software Options:
No Installed Software Options Found.
Related Commands
active Displays the version number of the software on the active partition.
inactive Displays the version number of the software on the inactive partition.
Release Modifications
1.1 This command was first documented.
Command Description
None
To Next Page
Loading...
