4-38
Cisco TelePresence Multipoint Switch Release 1.1 Administration Guide
OL-12586-02
Chapter 4 Configuring CTMS Administration Software
Configuring and Editing Access Management
• To edit one of the defined administrators, click the radio button to the left of the table entry, and then
click Edit.
• To define a new administrator, click New,
Step 3 When you click New from the Access Management screen, CTMS Administration software takes you to
the New User Settings table as shown in Figure 4-12.
Figure 4-12 New User Settings
Step 4 Enter settings as described in Table 4-10
Table 4-10 New User Settings
Field or Button Setting
Username Username identifying a defined role as selected from the Role field.
Note Usernames must be at least 5 characters, but not more than
64 characters in length, and can contain upper and lower case
alphanumeric characters and the underscore and dash
characters. The following usernames are not allowed:
apache, daemon, nobody, operator, and shutdown.
Password Password for the username indicated in the Username field.
Note Passwords must be at least 5 characters, but not more than 64
characters in length, and can contain upper and lower case
alphanumeric characters and the underscore and dash
characters. The following usernames are not allowed:
apache, daemon, nobody, operator, and shutdown.
To Next Page
Loading...
Need help?
General
