Contents
3
Cisco TelePresence Multipoint Switch Release 1.1 Administration Guide
OL-12586-02
Monitoring CTMS System Processes 7-67
Contents 7-67
Overview 7-67
Monitoring System Status 7-68
Monitoring and Restarting System Processes 7-69
Viewing Call Statistics 7-70
Room Testing 7-72
Interoperability with Legacy Video Conferencing Devices 8-75
Contents 8-75
Overview 8-75
How Cisco TelePresence Interoperability Works 8-75
Benefits 8-77
Caveats 8-77
Prerequisites 8-78
Configuring Cisco TelePresence Interoperability 8-79
Configuring Unified CM for Cisco TelePresence Interoperability 8-79
Creating a SIP Trunk Security Profile 8-79
Creating a SIP Trunk 8-80
Configuring a Route Pattern 8-80
Configuring CUVC for Cisco TelePresence Interoperability 8-81
Configuring CTMS for Cisco TelePresence Interoperability 8-85
Creating Static Meetings in CTMS for Interoperability 8-85
Troubleshooting Cisco TelePresence Interoperability 8-88
Command Line Interface (CLI) Commands A-1
Tables of Contents A-1
Introduction A-1
Starting a CLI Session A-1
CLI Command Basics A-2
Ending a CLI Session A-2
CTMS CLI Commands A-2
To Next Page
Loading...
