Cisco PenTeleData 8800 Series Guide

DescriptionParameter
Indicates the refer-to target.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Refer-To_Target_Contact_1_
ua="na">No</Refer-To_Target_Contact_1_>
• In the phone web page, select Yes to send the
SIP Refer to the contact.
Allowed values: Yes|No
Default: No
Refer-To Target Contact
Specifies the Referee Bye Delay time in seconds.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Referee_Bye_Delay_1_
ua="na">0</Referee_Bye_Delay_1_>
• In the phone web page, enter the appropriate
period of time in seconds.
Allowed values: An integer from 0 through 65535
Default: 0
Referee Bye Delay
Specifies the Refer Target Bye Delay time in seconds.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Refer_Target_Bye_Delay_1_
ua="na">0</Refer_Target_Bye_Delay_1_>
• In the phone web page, enter the appropriate
period of time in seconds.
Allowed values: An integer from 0 through 65535
Default: 0
Refer Target Bye Delay
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
370
Cisco IP Phone Installation
Parameters for SIP Settings on Extensions

Cisco PenTeleData 8800 Series Specifications

General

Brand	Cisco
Model	PenTeleData 8800 Series
Category	IP Phone
Language	English