EasyManuals Logo
Home>Cisco>Network Router>RV220W

Cisco RV220W User Manual

Cisco RV220W
105 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
15
up with TZO.
Status - The status of the TZO service connection is displayed
here.
Connect
Button
When DDNS is enabled, the Connect button is displayed. Use this button to
manually update your IP address information on the DDNS server. The
Status area on this screen also updates.
Static IP
If you are required to use a permanent IP address, select Static IP.
Figure 4: Static IP
Static IP Settings
Internet IP
Address
This is the Router’s IP address on the WAN port that can be reached from
the Internet.
Subnet Mask
Enter the Subnet mask to match the IP address above.
Default
Gateway
Your ISP will provide you with the Default Gateway (Router) to reach the
Internet.
Primary DNS
Your ISP will provide you with at least one DNS (Domain Name System)
Server IP Address to resolve host name to IP address mapping.
Secondary
DNS
The secondary DNS will only be used if the primary DNS is not available.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV220W and is the answer not in the manual?

Cisco RV220W Specifications

General IconGeneral
BrandCisco
ModelRV220W
CategoryNetwork Router
LanguageEnglish

Related product manuals