EasyManuals Logo
Home>Cisco>Network Router>RV220W

Cisco RV220W User Manual

Cisco RV220W
105 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #99 background imageLoading...
Page #99 background image
97
Status - Local Network
Figure 63: Local Network Screen
Local Network
Current IP Ad-
dress System
This shows the current system.
Mac Address
This is the Router MAC Address, as seen on your local, Ethernet
network.
IP Address
The Internet IP Address is displayed here.
Subnet Mask
This Subnet Mask is associated with the IP address above.
IPv6 Address
This shows the IPv6 IP address, if applicable.
DHCP Server
The status of the Router’s DHCP server function is displayed here.
Start IP Address
This shows the beginning of the range of IP addresses used by the
DHCP Server.
End IP Address
This shows the end of the range of IP addresses used by the DHCP
Server.
DHCP Client Table
Clicking this button will open a screen showing you which PCs are
utilizing the Router as a DHCP server. On the DHCP Client Table
screen, you will see a list of DHCP clients (PCs and other network
devices) with the following information: Client Names, Interfaces,
IP Addresses, MAC Addresses, and the length of time before their
assigned IP addresses expire.
ARP/RARP Table
Clicking this button will open a screen showing you which PCs are
utilizing the Router as an ARP/RARP server. On the ARP/RARP
Table screen, you will see a list of ARPs/RARPs (PCs and other
network devices) with the following information: IP Addresses and
MAC Addresses.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV220W and is the answer not in the manual?

Cisco RV220W Specifications

General IconGeneral
BrandCisco
ModelRV220W
CategoryNetwork Router
LanguageEnglish

Related product manuals