27
Setup - Time Screen
You can either define your Router’s time manually or automatically through Time Server.
Figure 13: Time Screen
Data - Time Screen
Time
Time
• Set the local time Manually - If you wish to enter the time and
date manually, enter the Day, Month, Year, Hour, Minute, and
Second in the Time field using 24 hour format (example 10:00pm
would be entered 22:0:0).
• Set the local time using Network Time Protocol (NTP) Auto-
matically - Select the time zone for your location and your setting
synchronizes over the Internet with public NTP (Network Time
Protocol) Servers.
Time Zone
Select the time zone for your location.
Auto Daylight
Saving
To use the daylight saving feature, select Enabled. Enter the Month
and Day of the start date, and then enter the Month and Day of the end
date.
User-defined
NTPServer
If you want to use your own NTP server, select the Enabled option.
The default is Disabled.
NTP Serve IP
Enter the IP address of your own NTP server.
To Next Page
Loading...
Need help?
General
