90
L2 Switch - VLAN & Port Assignment
Figure 56: VLAN & Port Assignment Screen
Port Settings
Port Mode
The table indicates each port’s current mode (Access, Trunk, or
General e). Wireless can be enabled in Access Mode.
Acceptable Ingress
Frame Type
Configure which kind of packet can be accepted in the port.
Ingress Filtering
Select the checkbox if you want to use Ingress Filtering.
PVID
Configure the PVID setting.
VLAN Settings
VLAN
Select the VLAN whose membership you want to configure.
Description
Enter a VLAN group name of up to 50 characters.
Outgoing Frame
Type
The table indicates each port’s outgoing frame type (Untagged,
Tagged, or Exclude).
VLAN/Port Assignment Summary
Table
Displays the table of summary.
To Next Page
Loading...
Need help?
General
