Cisco Servers - Page 343

9-7
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Chapter 9 Working with Logging and Reports
About Cisco Secure ACS Logs and Reports
• Configuring a TACACS+ Administration Log—The steps for configuring
a TACACS+ Administration log vary depending upon which format you want
to use. For more information about log formats, see the “Logging Formats”
section on page 9-1.
– CSV—The default location for CSV TACACS+ Administration files is
Program Files\CiscoSecure ACS vx.x\Logs\TACACS+Administration.
For instructions on configuring the CSV TACACS+ Administration log,
see the “Configuring a CSV Log” section on page 9-22.
– ODBC—For instructions on configuring the ODBC TACACS+
Administration log, see the “Configuring an ODBC Log” section on
page 9-27.
RADIUS Accounting Log
The RADIUS Accounting log contains the following information:
• User sessions stop and start times
• AAA client messages with username
• Caller line identification information
• Session duration
You can configure Cisco Secure ACS to include accounting for Voice over IP
(VoIP) in the RADIUS Accounting log, in a separate VoIP accounting log, or in
both places.
Topics regarding this log include the following:
• Enabling a RADIUS Accounting Log—You can enable the RADIUS
Administration log in either CSV or ODBC format.
– CSV—For instructions on how to enable the RADIUS Accounting log in
CSV format, see the “Enabling or Disabling a CSV Log” section on
page 9-19.
– ODBC—For instructions on how to enable the ODBC RADIUS
Accounting log, see the “Configuring an ODBC Log” section on
page 9-27.
• Viewing a RADIUS Accounting Report—For instructions on viewing the
RADIUS Accounting report in the HTML interface, see the “Viewing a CSV
Report” section on page 9-20.