Cisco Servers User Manual

Appendix G ODBC Import Definitions
Action Codes
G-16
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Table G-4 Action Codes for Initializing and Modifying Access Filters
Action
Code Name Required Description
120 INIT_NAS_ACCESS_
CONTROL
UN|GN,V1 Clear the AAA client access filter list and
initialize permit/deny for any forthcoming
filters. V1 should be one of the following
values:
• ACCESS_PERMIT
• ACCESS DENY
121 INIT_DIAL_ACCESS_
CONTROL
UN|GN,V1 Clear the dial-up access filter list and
initialize permit/deny for any forthcoming
filters. V1 should be one of the following
values:
• ACCESS_PERMIT
• ACCESS DENY
122 ADD_NAS_ACCESS_FILTER UN|GN,V1 Add a AAA client filter for the user|group.
V1 should contain a single (AAA client
name, AAA client port, remote address,
CLID) tuple; for example:
NAS01,tty0,0898-69696969
Optionally, the AAA client name can be
"All AAA clients" to specify that the filter
applies to all configured AAA clients and
an asterisk (*) to represent all ports.

Cisco Servers Specifications

General

Brand	Cisco
Model	Servers
Category	Software
Language	English