Cisco Servers User Manual

G-17
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Appendix G ODBC Import Definitions
Action Codes
123 ADD_DIAL_ACCESS_FILTER UN|GN, V1,
V2
Add a dial-up filter for the user|group.
V1 should contain one of the following
values:
• Calling station ID
• Called station ID
• Calling and called station ID; for
example:
• 01732-875374,0898-69696969
AAA client IP address, AAA client port; for
example:
10.45.6.123,tty0
V2 should contain the filter type as one of
the following values:
• CLID—The user is filtered by the
calling station ID.
• DNIS—The user is filtered by the
called station ID.
• CLID/DNIS—The user is filtered by
both calling and called station IDs.
• AAA client/PORT—The user is
filtered by AAA client IP and AAA
client port address.
130 SET_TOKEN_CACHE_
SESSION
GN, V1 Enable/disable token caching for an entire
session; V1 is 0=disable, 1=enable.
131 SET_TOKEN_CACHE_TIME GN, V1 Set the duration that tokens are cached. V1
is the token cache duration in seconds.
Table G-4 Action Codes for Initializing and Modifying Access Filters (continued)
Action
Code Name Required Description

Cisco Servers Specifications

General

Brand	Cisco
Model	Servers
Category	Software
Language	English