Packing List for a vEdge 2000 Router
The cardboard carton in which the router is packed includes a packing list. Check the parts you receive with
your router against the items on the packing list. The packing list specifies the name, part number, and quantity
of each item in the carton and the accessory box.
If any part on the packing list is missing, contact your customer service representative or contact Viptela
customer support from within the U.S. or Canada by telephone at 800-525-5033 or by email to
support@viptela.com .
Table 1 lists the parts shipped with the vEdge 2000 router and their quantities.
Table 70:
QuantityComponent
1Router chassis
4Fan tray (preinstalled)
2AC power supply (preinstalled)
2AC power cord appropriate for your geographical location (AC router
models only)
2 (1 per PIM slot)Blanking cover panel for PIM slots (preinstalled)
1 per port (both built-in and
PIM ports included)
Dust covers for ports (attached to router ports)
1USB console cable
1Short mounting ear, Right
1Short mounting ear, Left
1Extended mounting ear, Right
1Extended mounting ear, Left
21U slider
8Screws for rack mount (A)
8Screws for short or extended mounting ears (B)
4Additional screws for extended mounting ears (C)
8Screws for sliders (D)
4Screws for locking 1U sliders (E)
1vEdge 2000 Router Quick Start
Mount the vEdge 2000 Router in a Rack
You can mount the vEdge 2000 router in a 19-inch rack in one of the following ways:
Hardware Installation Guide for vEdge Routers
187
vEdge 2000 Router
Install the vEdge 2000 Router
To Next Page
Loading...
Need help?
General
