Administration
LED Display
Cisco WAP571/E Administration Guide 43
3
Data Encryption: TLSv1
SMTP Server: smtp.live.com
SMTP Port: 587
Username: Your full email address, such as myName@hotmail.com or
myName@myDomain.com
Password: Your Windows Live account password
Yahoo! Mail
Yahoo requires using a paid account for this type of service. Yahoo
recommends the following settings:
Data Encryption: TLSv1
SMTP Server: plus.smtp.mail.yahoo.com
SMTP Port: 465 or 587
Username: Your email address, without the domain name such as myName (without
@yahoo.com)
Password: Your Yahoo account password
The following example shows a sample format of a general log email:
From: AP-192.168.2.10@mailserver.com
Sent: Wednesday, September 09, 2009 11:16 AM
To: administrator@mailserver.com
Subject: log message from AP
TIME PriorityProcess Id Message
Sep 8 03:48:25 info login[1457] root login on ttyp0
Sep 8 03:48:26 info mini_http-ssl[1175] Max concurrent connections of 20
reached
LED Display
The WAP device has one LED. Use the LED Display page to enable or disable the
LED and associate LED with a configured scheduler profile.
The LED Display is Enabled by default. When LED Display is Disabled, the LED is
turned off. When LED Display value is Associate Scheduler, it will provide a drop-
down box to select a scheduler profile. When enabled, the LED indicates
corresponding status and activity of the WAP device.
To change the LED display:
STEP 1 Select Administration > LED Display in the navigation pane.
STEP 2 Select Enable/ Disable/ Associate Scheduler from the drop-down selection.
To Next Page
Loading...
Need help?
General
