FreeSpeak II for Eclipse | User Guide
4.3.3 How to set AA battery type: Nickel-metal hydride (NiMHi) or Alkaline for
wireless beltpacks
FreeSpeak II wireless beltpacks are supplied with Li-Ion batteries and battery charger.
However, in some cases you may wish to use AA batteries. You may need to use standard AA
alkaline batteries, or in a high atmospheric pressure (hyperbaric) environment, where you can’t
use Li-ion batteries, you may need to use NiMHi batteries.
When using AA batteries of either kind, it is helpful to set battery type so that battery capacity
can be monitored accurately. NiMHi batteries and alkaline batteries have different discharge
patterns and setting this option will allow for that.
AA Battery type must be set in the EHX software.
1. Open the EHX configuration software and navigate to Preferences/Wireless
Beltpacks/Battery type.
2. Select required battery type, NiMHi or Alkaline.
Note: The default setting for AA battery type is Alkaline.
Page 38
To Next Page
Loading...
Need help?
General
