FreeSpeak II for Eclipse | User Guide
The upgrade file is downloaded to the beltpack or transceiver.
Note: You can connect more than one beltpack to the computer if you have multiple USB ports. The
units will be upgraded sequentially.
4.3.10 Upgrading beltpack firmware by Over The Air Upgrade
Note: You must first upgrade the Transceivers before upgrading the beltpacks.
1. Right-click on the Frame in the Layout window, and then select Firmware > Update
Firmware. The Update Firmware Wizard appears.
2. Select Next. The following screen appears:
3. Select the Wireless radio button. There are two further options:
n
Automatic – select this option to automatically upgrade the beltpack when it is
switched on.
n
Prompted – select this option to allow the beltpack user to confirm the upgrade.
4. Select Next, and then browse to the upgrade file (.fww) and select Open. The upgrade file is
loaded to the transceiver. The upgrade file is downloaded to all the connected beltpacks,
and the beltpacks automatically restart.
The transceivers store the beltpack upgrade files until they are power cycled or there is a black
reset.
You can track the status of the download in the EHX Event Log, and for beltpack upgrades the
upgrade status is also shown on the beltpack display.
Page 41
To Next Page
Loading...
Need help?
General
