Clear-Com Tempest 900 Reference Manual

74 Tempest®900 4-Channel Wireless Intercom System
System Features
• All digital, frequency hopping spread spectrum technology - no frequency coordinaon needed
• 900MHz oers World-Wide operaon with no licensing requirements in most world-wide locaons
• Accu Sync™ ming system for improved performance with mulple BaseStaons
• iSelect™ On-Command roaming
• Four intercom channels and up to 5 full duplex BeltStaons per BaseStaon in Normal Mode
• Congure up to 5, 900MHZ BaseStaons with 25 full duplex BeltStaons in a single system when operang in
Normal Mode
• An unlimited number of BeltStaons per BaseStaon in Shared and Split Mode
• BeltStaons can access intercom channels in “Dual-listen” mode
• Weather resistant BeltStaons
• BeltStaons can send and receive “Call Alert” signal from wired intercom systems
• Silent vibrate mode on BeltStaons
• Both “Stage Announce” and GPO Relay funcon available for each BeltStaon
• Talk switches can be de-latched via the Mic Kill feature from either the BaseStaon or the hard wire intercom
• Auxiliary audio input and output
• Program Volume control allows user to set volume of incoming program audio
• LAN control interface
• Electret or Dynamic Mic auto select
• Mulple antenna connecon opons
• Compable with Clear-Com®, RTS®, Telex®, and other 2-Wire and 4-Wire intercom systems

Clear-Com Tempest 900 Specifications

General

Brand	Clear-Com
Model	Tempest 900
Category	Intercom System
Language	English