Chapter 3: Operate the system
Use a phone or fax machine 47
3333
When you have an already established call you can initiate a conference call
by using the following options:
For information how to make a multi-party call using the AVIATOR Wireless
Handset see the user manual of the AVIATOR Wireless Handset.
To forward a call
You can set up the system to automatically forward incoming calls to
another phone number. This information is saved in the SwiftBroadband
network so it is available when the call cannot be put through and must be
forwarded. This service is usually setup by the airtime provider.
To forward incoming calls do as follows:
1. Select SETTINGS > Common > Call forward from the left navigation
pane.
If you want to: Do as follows:
Add an incoming
call announced by
the Call Waiting
indication.
Press R 2 #, the already established call is put on hold
and the incoming call is connected for you to have
an initial conversation with the caller before the call
is added to the conference call.
Then press R 3 #, you are returned to the held calls
and the incoming call is joined in the conference call.
Initiate a new call
and have it joined
to the already
existing call.
Press R <phone number> #, to initiate a new call
and have an initial conversation before the call is
added to the conference call.
Then press R 3 #, you are returned to the held calls
and the initiated call is joined in the conference call.
Clear all calls. Press R 1 # or alternatively just hang-up.
To Next Page
Loading...
