Chapter 3: Operating the system
98-129217-D Multi-voice (optional) 38
Additional numbers for Multi-voice
In addition to the phone numbers for incoming Standard Voice and 3.1 kHz Audio, your
subscription may include extra phone numbers that can be assigned to specific handsets. If
you want to use the additional phone numbers in your subscription, you must set up the
following in the web interface:
• Enable the use of additional numbers in the web interface under ADMINISTRATION >
Multi-voice. See Multi-voice on page 116.
• Add the additional numbers from your airtime subscription under PHONE BOOK >
MOBILE NUMBERS > ADDITIONAL NUMBERS.
• Assign the numbers to handsets. Depending on the handset interface you want to use, see
Configuring the Phone/Fax interface on page 80 and/or Setting the call types for IP
handsets on page 89.
Note about billing
Note that handsets using the 2-wire interface cannot be billed individually but are always billed against
the primary MSISDN (the terminal’s mobile number for Standard voice or 3.1 kHz Audio).
You must have Multi-voice with additional numbers in your
airtime subscription to be able to use this feature.
To Next Page
Loading...
