COMPLIANCE
EMC AND SAFETY NOTICES
96 Envoy™ Transceiver Getting Started Guide
EMC and safety notices
Radiation safety (non-EU installations)
To ensure optimal transceiver performance and to avoid exposure
to excessive electromagnetic fields, the antenna system must be
installed according to the instructions provided.
WARNING: High voltages exist on the antenna during
transmission and tuning. Do not touch the
antenna during these activities. RF burns may
result.
WARNING: Install the grounding system or counterpoise as
directed to prevent RF burns from any metal part
of the transceiver.
WARNING: You should not transmit from your transceiver or
tune the antenna unless people are beyond the
safe working distance for the installation.
The following safe working distances apply:
• anywhere within the vehicle cabin with externally mounted
mobile antenna
• 1.5 m (5 ft) unobstructed, of any part of a mobile antenna
• 2 m (7 ft) of any part of a fixed antenna in a data installation
of up to 125 W output
• 5 m (17 ft) of any part of a fixed antenna in a data
installation of up to 1 kW output
Safe working distance is based on continuous exposure to CW-type
transmissions, as set out in the ICNIRP Exposure Guidelines
(1998) for occupational exposure. Safe working distance can be
reduced with normal voice communication.
To Next Page
Loading...
Need help?
General
