INTRODUCTION
KEYPAD
8ENVOY™ TRANSCEIVER GETTING STARTED GUIDE
Keypad
Standard macros are programmed in the transceiver in the factory.
You can create a macro and assign it to a hot key.
Table 1: Keys and their function
Key Function
Switches on the transceiver.
Switches off the transceiver (hold for 2 sec).
Performs a hot-key sequence with another key (hold + key):
+ 0 jumps to the Brightness screen
+ 2 toggles advanced view
+ 3 jumps to the Select Language screen
+
SEC performs secure erase
+ performs the built-in test
Starts a chain call of emergency contacts (hold for 2 sec).
PTT Press-to-talk.
Cancels out of editing and calls before they are connected.
Performs the function shown directly above the key in the
menu bar.
Scrolls left in a list of values.
Moves the cursor/highlight to the left.
Reduces the volume when the indicator is shown in the
menu bar.
Scrolls right in a list of values.
Moves the cursor/highlight to the right.
Increases the volume when the indicator is shown in the
menu bar.
Scrolls up in a list of entries.
Moves the highlight up a row.
To Next Page
Loading...
Need help?
General
