OPERATING THE TRANSCEIVER
CALLING
ENVOY™ TRANSCEIVER GETTING STARTED GUIDE 61
1 Do one of the following:
• To repeat the call to the last address used,
press CALL.
• To call a different station, enter the address, then
press CALL.
• To repeat or return a call from the call log, press
to scroll to the call, then press CALL.
1 If prompted, press or to scroll to the channel that you
want to use.
A is shown next to the currently selected channel/mode.
1 Press CALL.
To abort the call before it is answered, press PTT or SCAN.
There will be audible beeps or a pop-up message to indicate
that the call has been successful.
Making a Message call
If you want to send a text message to another station, make a
Message call.
You can:
• enter a message at the time that you make a call
• store up to 10 messages in User Data > Messages for
later use
• store messages in a contact as part of a pre-programmed
Message call
To Next Page
Loading...
Need help?
General
