OPERATING THE TRANSCEIVER
CALLING
62 ENVOY™ TRANSCEIVER GETTING STARTED GUIDE
To make a Message call:
1 Press CALL.
1 Do one of the following:
• Press or to scroll to the HF network that you
want to use, then press CALL.
•Press (Options), scroll to HF Networks,
press (Select), scroll to the HF network that
you want to use, then press CALL.
The call type and address of the last call is shown at the top
of the call screen.
1 Press or to scroll to the Message call type if it is not
selected.
1 Do one of the following:
• To repeat the call to the last address used,
press CALL.
• To call a different station, enter the address, then
press CALL.
• To repeat or return a call from the call log, press
to scroll to the call, then press CALL.
1 Press CALL.
To Next Page
Loading...
Need help?
General
