OPERATING THE TRANSCEIVER
SCANNING CHANNELS
ENVOY™ TRANSCEIVER GETTING STARTED GUIDE 53
Pausing scanning
To pause scanning:
1 Do one of the following:
• To pause scanning on the last-selected channel,
press OK.
• To pause scanning and scroll to another channel,
press or .
The channel/modes through which you can scroll are those
in the scan tables that are being scanned. They are not listed
alphabetically but in the order in which they are being
scanned.
If you do not press a key within 30 sec, the transceiver
automatically resumes scanning.
1 While scanning is paused, do one of the following:
• To speak on the selected channel, hold down PTT.
• To resume scanning immediately, press OK.
To Next Page
Loading...
Need help?
General
