OPERATING THE TRANSCEIVER
CALLING
ENVOY™ TRANSCEIVER GETTING STARTED GUIDE 63
1 If you want to enter a message:
• Start typing the message.
NOTE: Press OK to start a new line, if
required.
•Press (Options), scroll to Save, then
press (Select) to add the message to the call.
1 If you want to select a message from a list of stored
messages:
•Press (Options), scroll to Stored, then
press (Select).
• Press or to scroll to the message that you want
to use.
NOTE: If you want to view the message,
press (Details), then
press (Close).
•PressOK to select the message.
• Edit the message, if required.
•Press (Options), scroll to Save, then
press (Select).
1 If prompted, press or to scroll to the channel that you
want to use.
A is shown next to the currently selected channel/mode.
To Next Page
Loading...
Need help?
General
