CONTACTS
ADDING A CONTACT FROM AN ENTRY IN THE CALL LOG OR CALL HISTORY
76 ENVOY™ TRANSCEIVER GETTING STARTED GUIDE
1 Do one of the following:
• If there is an existing contact, select the contact,
press OK, then edit the call as required.
• If there is no matching contact, edit the call as
required.
1 Press (Save) to save the information.
You are informed if the call already exists for the contact. If
the contact does not exist, add the contact.
1 Press (Save) to save the information.
To Next Page
Loading...
Need help?
General
