ComAp InteliLite AMF25 - Page 253

InteliLite Global Guide
253
Subgroup: Frequency Protection
Setpoint group Protections Related FW 1.9.0
Range [units] Enabled / Disabled / By LBI [-]
Default value Enabled Alternative config NO
Step [-]
Comm object 15670 Related applications AMF, MRS
Config level Advanced
Setpoint visibility Always
Description
This setpoint adjusts the behavior of generator Generator Frequency protection. GCBclosing is blocked, if
the protection is disabled!.
Enabled:
Protection is enabled. Behavior of protection is adjusted via setpoints Generator
Overfrequency BOC (page 248), Generator Overfrequency Wrn (page 248),
Generator Underfrequency BOC (page 249), Generator Underfrequency Wrn
(page 249), and Generator <> Frequency Delay (page 249).
Disabled: Protection is disabled.
By LBI: Protection is enabled or disabled by the state of LBI PROTECTION ENABLE (PAGE 561).
Generator Frequency Protection
6 back to List of setpoints
Subgroup: Speed Protection
Setpoint group Protections Related FW 1.9.0
Range [units] Enabled / Disabled / By LBI [-]
Default value Enabled Alternative config NO
Step [-]
Comm object 15671 Related applications AMF, MRS
Config level Advanced
Setpoint visibility Always
Description
This setpoint adjusts the behavior of generator Underspeed protection.
Enabled:
Protection is enabled. Behavior of protection is adjusted via setpoint Underspeed Sd
(page 223).
Disabled: Protection is disabled.
By LBI: Protection is enabled or disabled by the state of LBI PROTECTION ENABLE (PAGE 561).
Underspeed Protection
6 back to List of setpoints