ComAp InteliLite AMF25 User Manual

InteliLite Global Guide
381
Setpoint group CM-Ethernet Related FW 1.9.0
Range [units] DISABLED / ENABLED [-]
Default value Disabled Alternative config NO
Step [-]
Comm object 24337 Related applications AMF, MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
Enable or disable MODBUS communication via ethernet interface.
MODBUS Server
6 back to List of setpoints
Setpoint group CM-Ethernet Related FW 1.9.0
Range [units] DISABLED / ENABLED [-]
Default value DISABLED Alternative config NO
Step [-]
Comm object 24336 Related applications AMF, MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
Enable or disable SNMP v1 Agent.
SNMP Agent
6 back to List of setpoints
Setpoint group CM-Ethernet Related FW 1.9.0
Range [units] 0..31 characters [-]
Default value public Alternative config NO
Step [-]
Comm object 24335 Related applications AMF, MRS
Config level Standard
Setpoint visibility
Only if relevant module is installed + conditioned by the setpoint SNMP Agent (page
381)
Description
SNMP Community String only for reading.
SNMP RD Community String
6 back to List of setpoints

ComAp InteliLite AMF25 Specifications

General

Inputs	8 binary inputs
Outputs	8 binary outputs
Power Supply	8-36 V DC
Communication	RS232, RS485
Operating Temperature	-20°C to +70°C
Supported Generators	Diesel, gas
Controller Type	Automatic Mains Failure Controller
Protection	IP65