ComAp InteliLite AMF25 User Manual

InteliLite Global Guide
663
Alarm Type Warning
Alarmlist message Override All Sd
Alarm evaluated All the time
Related applications AMF, MRS
Description This alarm occurs when binary input SD OVERRIDE (PAGE 537) is activated.
Wrn Override All Sd
6 back to List of alarms level 1
Alarm Type Warning
Alarmlist message Wrn Rental Timer 1
Alarm evaluated All the time
Related applications AMF, MRS
Description
This alarm occurs xx hours before Rental Timer 1 (page 317) elapsed. Hours are
adjusted by setpoint Rental Timer 1 Wrn (page 319).
Wrn Rental Timer 1
6 back to List of alarms level 1
Alarm Type Warning
Alarmlist message Wrn Rental Timer 2
Alarm evaluated All the time
Related applications AMF, MRS
Description
This alarm occurs xx hours before Rental Timer 2 (page 319) elapsed. Hours are
adjusted by setpoint Rental Timer 2 Wrn (page 321).
Wrn Rental Timer 2
6 back to List of alarms level 1
Alarm Type Warning
Alarmlist message Wrn Stop Fail
Alarm evaluated While the engine shall be stopped
Wrn Stop Fail

ComAp InteliLite AMF25 Specifications

General

Inputs	8 binary inputs
Outputs	8 binary outputs
Power Supply	8-36 V DC
Communication	RS232, RS485
Operating Temperature	-20°C to +70°C
Supported Generators	Diesel, gas
Controller Type	Automatic Mains Failure Controller
Protection	IP65