ComAp InteliLite AMF25 User Manual

InteliLite Global Guide
720
Operating temperature - 30 °C to + 70 °C
Dimensions (WxHxD) 110x110x46 mm (4,3”x4,3”x1,8”)
Weight 240 grams
Number of channels 2
Voltage
Range 0-10 V
Accuracy: ± 20 mV + ±0,5 % of actual value
Imax 5 mA
Current
Range: 0-20 mA
Accuracy: ± 100 µA + ±0,5 % of actual value
Rmax 500 Ω
PWM
Level 5 V
Frequency - adjustable 200÷2400 Hz
Imax 20 mA
Analog outputs
Number of channels 8 for Inteli IO8/8, 16 for Inteli IO 16/0
Input resistance 4400 Ω
Input range 0 to 36 V DC
Switching voltage level for open contact
indication
0 to 2 V DC
Max voltage level for close contact indication 6 to 36 V DC
Binary inputs
Number of channels 8 for Inteli IO8/8, 0 for Inteli IO 16/0
Max current 500 mA
Max switching voltage 36 V DC
Binary outputs
IGS-PTM
IGS-PTM module is extension module equipped with binary inputs, binary outputs, analog inputs and analog
output. IGS-PTM module is connected to controller by CAN1 bus.

ComAp InteliLite AMF25 Specifications

General

Inputs	8 binary inputs
Outputs	8 binary outputs
Power Supply	8-36 V DC
Communication	RS232, RS485
Operating Temperature	-20°C to +70°C
Supported Generators	Diesel, gas
Controller Type	Automatic Mains Failure Controller
Protection	IP65