InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
This setpoint adjusts the delay #1 which can be assigned to an input
configured as alarm input (protection).
NOTE:
Protections configured at a binary inputs can have either fixed 0.5s
evaluation delay or there are three independent delay setpoints and one of
them can be assigned to each particular binary input protection.
11.2.4.3 Setpoint: BinInp delay 2
This setpoint adjusts the delay #2 which can be assigned to an input
configured as alarm input (protection).
NOTE:
Protections configured at a binary inputs can have either fixed 0.5s
evaluation delay or there are three independent delay setpoints and one of
them can be assigned to each particular binary input protection.
11.2.4.4 Setpoint: BinInp delay 3
This setpoint adjusts the delay #3 which can be assigned to an input
configured as alarm input (protection).
NOTE:
Protections configured at a binary inputs can have either fixed 0.5s
evaluation delay or there are three independent delay setpoints and one of
them can be assigned to each particular binary input protection.
11.2.4.5 Setpoint: ForceBlockDel1
To Next Page
Loading...