ComAp InteliMains NT IM-NT-BB - Page 282

InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
282
Range [units]
[-]
Related FW
standard v3.1.0
Description
This setpoint adjusts the mode of the Timer channel #2. Output from this
channel is available in the combined output TimerAct 1-4.
NOTE:
See the chapter Timers for more details about timers.
11.2.14.3 Setpoint: Timer channel 3
Group
Timer settings
Range [units]
[-]
Related FW
standard v3.1.0
Description
This setpoint adjusts the mode of the Timer channel #3. Output from this
channel is available in the combined output TimerAct 1-4.
NOTE:
See the chapter Timers for more details about timers.
11.2.14.4 Setpoint: Timer channel 4
Group
Timer settings
Range [units]
[-]
Related FW
standard v3.1.0
Description
This setpoint adjusts the mode of the Timer channel #4. Output from this
channel is available in the combined output TimerAct 1-4.
NOTE:
See the chapter Timers for more details about timers.
11.2.14.5 Setpoint: Timer channel 5
Group
Timer settings
Range [units]
[-]
Related FW
standard v3.1.0