InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
Mains power factor in phase L2.
12.1.1.18 Value: M Ld char L2
Character of the Mains load in the L2 phase. "L" means inductive load, "C" is
capacitive and "R" is resistive load (power factor = 1).
12.1.1.19 Value: MPf L3
Mains power factor in phase L3.
12.1.1.20 Value: M Ld char L3
Character of the Mains load in the L3 phase. "L" means inductive load, "C" is
capacitive and "R" is resistive load (power factor = 1).
12.1.1.21 Value: Mains freq
Mains frequency. The frequency is measured in the phase L3.
To Next Page