ComAp InteliMains NT IM-NT-BB - Page 343

InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
343
12.1.17.7 Value: M kVAhr E
Group
Statistics
Units
-
Related FW
standard v3.1.0
Description
This value shows the sum of kVAhr exported to the mains.
NOTE:
The counter can be readjusted/reset from InteliMonitor menu Monitor -> Set
statistics.
12.1.17.8 Value: PulseCounter 1
Group
Statistics
Units
-
Related FW
standard v3.1.0
Description
This is the value of PulseCounter #1 module. See the binary input
PulseCounter 1.
12.1.17.9 Value: PulseCounter 2
Group
Statistics
Units
-
Related FW
standard v3.1.0
Description
This is the value of PulseCounter #2 module. See the binary input
PulseCounter 2.
12.1.17.10 Value: PulseCounter 3
Group
Statistics
Units
-
Related FW
standard v3.1.0
Description
This is the value of PulseCounter #3 module. See the binary input
PulseCounter 3.