InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
to be opened regardless of the position of normal and negative feedback of
that CB.
13.2.1.108 Binary input: MGCBIsolated
This input can be used for secondary breaker feedback. When this logical
binary input gets activated the controller will consider the corresponding CB
to be opened regardless of the position of normal and negative feedback of
that CB.
13.2.1.109 Binary input: ImpCountSet1-4
This binary input sets the according impulse counter to a value in setpoint
ImpCountDef.
To Next Page
Loading...