ComAp InteliMains NT IM-NT-BB - Page 398

InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
398
MCB UV COIL OUTPUT TIMING
There are also other outputs availabe for GCB control:
 MCB close/open
 MCB ON coil
 MCB OFF coil
14.2.1.10 Binary output: Vmains <>
Related FW
standard v3.1.0
Description
The output is closed while the mains over/under voltage alarm is present in
the alarm list.
14.2.1.11 Binary output: Vmains <>
Related FW
standard v3.1.0
Description
The output is closed while the mains or bus over/under voltage alarm is
present in the alarm list.
14.2.1.12 Binary output: Vbus <>
Related FW
standard v3.1.0
Description
The output is closed while the bus over/under voltage alarm is present in the
alarm list.