ComAp InteliMains NT IM-NT-BB - Page 427

InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
427
14.2.1.104 Binary output: RemoteControl1
Related FW
standard v3.1.0
Description
This is a general purpose output, which can be closed and opened remotely,
e.g. from InteliMonitor using the "Remote switches" tool or via MODBUS
using the register #46361 and command #26.
NOTE:
See the Remote switches chapter in the InteliMonitor help for details about
how to control the output from InteliMonitor and the Modbus chapter in the
latest communication guide for information about control the output using
Modbus.
14.2.1.105 Binary output: RemoteControl2
Related FW
standard v3.1.0
Description
This is a general purpose output, which can be closed and opened remotely,
e.g. from InteliMonitor using the "Remote switches" tool or via MODBUS
using the register #46361 and command #26.
NOTE:
See the Remote switches chapter in the InteliMonitor help for details about
how to control the output from InteliMonitor and the Modbus chapter in the
latest communication guide for information about control the output using
Modbus.
14.2.1.106 Binary output: RemoteControl3
Related FW
standard v3.1.0
Description
This is a general purpose output, which can be closed and opened remotely,
e.g. from InteliMonitor using the "Remote switches" tool or via MODBUS
using the register #46361 and command #26.
NOTE:
See the Remote switches chapter in the InteliMonitor help for details about
how to control the output from InteliMonitor and the Modbus chapter in the
latest communication guide for information about control the output using
Modbus.
14.2.1.107 Binary output: RemoteControl4
Related FW
standard v3.1.0