Compac C5000

101.
Troubleshooting
Problem
Likely Cause(s)
Recommended Action
The preset display is
flashing after a fill.
The preset amount has been
exceeded.
NOTE: The preset display will
stop flashing when the next fill
is started
If problem continues
contact your service
agent.
Gas flows but does not
read up on the display.
The C5000 needs to be reset.
Re-power dispenser.
If problem continues
contact your service
agent
The dispenser stops at
9999.99,
99999.9, or
999999 units
according to where the
decimal point is set.
The dispenser will stop
dispensing if either the money
or the quantity displays ever
reach these values.
Hang up the nozzle to
reset the display and
restart.
This is not a dispenser
fault.
NOTE: When fixing a Compac CNG Dispenser fault, please follow the recommendations
and safety information in this manual. Failure to do this may cause injury or void the
warranty.