Compac C5000 Service Manual

12.
Dispenser Set
-Up
B Pump Settings
The bA setting is where you can set the dispenser in to standalone mode.
Standalone mode means that the dispenser doesn’t communicate to a controller or
POS.
If the dispenser is in authorisation mode the dispenser will not start even if there is
no controller or POS connected.
Note: If the dispenser is communicating to a controller or POS it will not operatate in
standalone mode. To put the dispenser in to standalone while still connected to the
controller or POS set the CC setting to cc0000 setting
BA 1000
Pump Settings
0-Authorisation Mode
1-Standalone Mode

Compac C5000 Specifications

General

Brand	Compac
Model	C5000
Category	Control Unit
Language	English